Sample article for dev.manuscriptcentral.com
OffiziellAutor
JLM
Letzte Aktualisierung
vor 3 Jahren
Lizenz
Creative Commons CC BY 4.0
Abstrakt
Test article for Scholar One Manuscripts.
%%% additional documentclass options:
% [doublespacing]
% [linenumbers] - put the line numbers on margins
%%% loading packages, author definitions
%\documentclass[twocolumn]{bmcart}% uncomment this for twocolumn layout and comment line below
\documentclass{bmcart}
%%% Load packages
%\usepackage{amsthm,amsmath}
%\RequirePackage{natbib}
%\RequirePackage{hyperref}
\usepackage[utf8]{inputenc} %unicode support
%\usepackage[applemac]{inputenc} %applemac support if unicode package fails
%\usepackage[latin1]{inputenc} %UNIX support if unicode package fails
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% If you wish to display your graphics for %%
%% your own use using includegraphic or %%
%% includegraphics, then comment out the %%
%% following two lines of code. %%
%% NB: These line *must* be included when %%
%% submitting to BMC. %%
%% All figure files must be submitted as %%
%% separate graphics through the BMC %%
%% submission process, not included in the %%
%% submitted article. %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\includegraphic{}
\def\includegraphics{}
%%% Put your definitions there:
\startlocaldefs
\endlocaldefs
%%% Begin ...
\begin{document}
%%% Start of article front matter
\begin{frontmatter}
\begin{fmbox}
\dochead{--dev--}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% Enter the title of your article here %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\title{Sample article for dev.manuscriptcentral.com}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% Enter the authors here %%
%% %%
%% Specify information, if available, %%
%% in the form: %%
%% <key>={<id1>,<id2>} %%
%% <key>= %%
%% Comment or delete the keys which are %%
%% not used. Repeat \author command as much %%
%% as required. %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\author[
addressref={aff1}, % id's of addresses, e.g. {aff1,aff2}
corref={aff1}, % id of corresponding address, if any
noteref={n1}, % id's of article notes, if any
email={jane.e.doe@cambridge.co.uk} % email address
]{\inits{JE}\fnm{Jane E} \snm{Doe}}
\author[
addressref={aff1,aff2},
email={john.RS.Smith@cambridge.co.uk}
]{\inits{JRS}\fnm{John RS} \snm{Smith}}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% Enter the authors' addresses here %%
%% %%
%% Repeat \address commands as much as %%
%% required. %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\address[id=aff1]{% % unique id
\orgname{Department of Zoology, Cambridge}, % university, etc
\street{Waterloo Road}, %
%\postcode{} % post or zip code
\city{London}, % city
\cny{UK} % country
}
\address[id=aff2]{%
\orgname{Marine Ecology Department, Institute of Marine Sciences Kiel},
\street{D\"{u}sternbrooker Weg 20},
\postcode{24105}
\city{Kiel},
\cny{Germany}
}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% Enter short notes here %%
%% %%
%% Short notes will be after addresses %%
%% on first page. %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{artnotes}
%\note{Sample of title note} % note to the article
\note[id=n1]{Equal contributor} % note, connected to author
\end{artnotes}
\end{fmbox}% comment this for two column layout
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% The Abstract begins here %%
%% %%
%% Please refer to the Instructions for %%
%% authors on http://www.biomedcentral.com %%
%% and include the section headings %%
%% accordingly for your article type. %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{abstractbox}
\begin{abstract} % abstract
\parttitle{First part title} %if any
Text for this section.
\parttitle{Second part title} %if any
Text for this section.
\end{abstract}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% The keywords begin here %%
%% %%
%% Put each keyword in separate \kwd{}. %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{keyword}
\kwd{sample}
\kwd{article}
\kwd{author}
\end{keyword}
% MSC classifications codes, if any
%\begin{keyword}[class=AMS]
%\kwd[Primary ]{}
%\kwd{}
%\kwd[; secondary ]{}
%\end{keyword}
\end{abstractbox}
%
%\end{fmbox}% uncomment this for twcolumn layout
\end{frontmatter}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% The Main Body begins here %%
%% %%
%% Please refer to the instructions for %%
%% authors on: %%
%% http://www.biomedcentral.com/info/authors%%
%% and include the section headings %%
%% accordingly for your article type. %%
%% %%
%% See the Results and Discussion section %%
%% for details on how to create sub-sections%%
%% %%
%% use \cite{...} to cite references %%
%% \cite{koon} and %%
%% \cite{oreg,khar,zvai,xjon,schn,pond} %%
%% \nocite{smith,marg,hunn,advi,koha,mouse}%%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%% start of article main body
% <put your article body there>
%%%%%%%%%%%%%%%%
%% Background %%
%%
\section*{Content}
Text and results for this section, as per the individual journal's instructions for authors. %\cite{koon,oreg,khar,zvai,xjon,schn,pond,smith,marg,hunn,advi,koha,mouse}
\section*{Section title}
Text for this section \ldots
\subsection*{Sub-heading for section}
Text for this sub-heading \ldots
\subsubsection*{Sub-sub heading for section}
Text for this sub-sub-heading \ldots
\paragraph*{Sub-sub-sub heading for section}
Text for this sub-sub-sub-heading \ldots
In this section we examine the growth rate of the mean of $Z_0$, $Z_1$ and $Z_2$. In
addition, we examine a common modeling assumption and note the
importance of considering the tails of the extinction time $T_x$ in
studies of escape dynamics.
We will first consider the expected resistant population at $vT_x$ for
some $v>0$, (and temporarily assume $\alpha=0$)
%
\[
E \bigl[Z_1(vT_x) \bigr]= E
\biggl[\mu T_x\int_0^{v\wedge
1}Z_0(uT_x)
\exp \bigl(\lambda_1T_x(v-u) \bigr)\,du \biggr].
\]
%
If we assume that sensitive cells follow a deterministic decay
$Z_0(t)=xe^{\lambda_0 t}$ and approximate their extinction time as
$T_x\approx-\frac{1}{\lambda_0}\log x$, then we can heuristically
estimate the expected value as
%
\begin{eqnarray}\label{eqexpmuts}
E\bigl[Z_1(vT_x)\bigr] &=& \frac{\mu}{r}\log x
\int_0^{v\wedge1}x^{1-u}x^{({\lambda_1}/{r})(v-u)}\,du
\nonumber\\
&=& \frac{\mu}{r}x^{1-{\lambda_1}/{\lambda_0}v}\log x\int_0^{v\wedge
1}x^{-u(1+{\lambda_1}/{r})}\,du
\nonumber\\
&=& \frac{\mu}{\lambda_1-\lambda_0}x^{1+{\lambda_1}/{r}v} \biggl(1-\exp \biggl[-(v\wedge1) \biggl(1+
\frac{\lambda_1}{r}\biggr)\log x \biggr] \biggr).
\end{eqnarray}
%
Thus we observe that this expected value is finite for all $v>0$ (also see \cite{koon,khar,zvai,xjon,marg}).
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% Backmatter begins here %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{backmatter}
\section*{Competing interests}
The authors declare that they have no competing interests.
\section*{Author's contributions}
Text for this section \ldots
\section*{Acknowledgements}
Text for this section \ldots
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% The Bibliography %%
%% %%
%% Bmc_mathpys.bst will be used to %%
%% create a .BBL file for submission. %%
%% After submission of the .TEX file, %%
%% you will be prompted to submit your .BBL file. %%
%% %%
%% %%
%% Note that the displayed Bibliography will not %%
%% necessarily be rendered by Latex exactly as specified %%
%% in the online Instructions for Authors. %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% if your bibliography is in bibtex format, use those commands:
\bibliographystyle{bmc-mathphys} % Style BST file
\bibliography{bmc_article} % Bibliography file (usually '*.bib' )
% or include bibliography directly:
% \begin{thebibliography}
% \bibitem{b1}
% \end{thebibliography}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% Figures %%
%% %%
%% NB: this is for captions and %%
%% Titles. All graphics must be %%
%% submitted separately and NOT %%
%% included in the Tex document %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%
%% Do not use \listoffigures as most will included as separate files
\section*{Figures}
\begin{figure}[h!]
\caption{\csentence{Sample figure title.}
A short description of the figure content
should go here.}
\end{figure}
\begin{figure}[h!]
\caption{\csentence{Sample figure title.}
Figure legend text.}
\end{figure}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% Tables %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Use of \listoftables is discouraged.
%%
\section*{Tables}
\begin{table}[h!]
\caption{Sample table title. This is where the description of the table should go.}
\begin{tabular}{cccc}
\hline
& B1 &B2 & B3\\ \hline
A1 & 0.1 & 0.2 & 0.3\\
A2 & ... & .. & .\\
A3 & .. & . & .\\ \hline
\end{tabular}
\end{table}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% Additional Files %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section*{Additional Files}
\subsection*{Additional file 1 --- Sample additional file title}
Additional file descriptions text (including details of how to
view the file, if it is in a non-standard format or the file extension). This might
refer to a multi-page table or a figure.
\subsection*{Additional file 2 --- Sample additional file title}
Additional file descriptions text.
\end{backmatter}
\end{document}